EverReady PP1

The EverReady PP1 battery was popular in the early 1960's is a 6 volt battery. Scan supplied by Gordon Williams.

Just right click your mouse on the required version and select "Print Target" or save to your computer by selecting "Save Target As..." then print it out. 

Set your printer to 100% zoom as this will just fit onto an A4 sheet of paper. (When completed the battery should form a cube with sides 2.6" x 2.2" x 2.2" or 65 mm x 55 mm x 55mm).  Print it onto the thickest card your printer can handle, cut around the whole shape, crease where necessary and glue all but the top flaps together. 4 'C' cells will probably be a good fit inside. The contacts are the same as on a modern PP9 (276) battery.